Pre-Owned Equipment

The Medtronic 5348 single-chamber temporary pacemaker is a battery-powered temporary pacemaker that was designed to assist in anti-bradycardia pacing therapy. The Medtronic 5348 temporary pacemaker is intended to work with either a cardiac pacing lead system for temporary atrial or temporary ventricular pacing. The system runs on a 9-volt alkaline or lithium battery. This pacemaker emits a current pulse that can maintain a consistent value that is set by the dials on the system. Another single-chamber pacemaker by Medtronic would be the Medtronic 5391.

 

• Easy-to-use operating system.
• Reversible battery polarity makes it easy to change the battery.
• can easily be attached to either a bed or an IV pole.
• Expanded therapy options.
• Increased sensitivity range (0.5 to 20 mV) to provide increased ability to sense p- and r-waves over other devices.
• Provides rapid atrial pacing (to 800 ppm) to better manage atrial flutter.

 

Dimensions

• Height: 7.4 in (18.8 cm)
• Width:2.4 in (6.1 cm)
• Depth: 1.6 in (4.1 cm)
• Weight: 10 oz (283 g) with battery

General Specifications

 

• Base level pacing rates: 30-180 min (ppm) (continuously adjustable) ± 10%
• Rapid atrial pacing rates:
  • 80-380 min (ppm) (5 min {ppm}) increments) ± 10%
  • 380-540 min (ppm) (10 min {ppm}) increments) ± 10%
  • 540-800 min (ppm) (20 min {ppm}) increments) ± 10%
• Output amplitude: 0.1-20 mA (continuously adjustable) ± 15% plus ± 0.1 mA
• Pulse Width: 1.8 ms ± 10%b
• Sensitivity: ASYNC., 0.5 to 20 mV (continuously adjustable) ± 25% or ± 0.30 mV (whichever is greater), including polarity disparity
• Blanking: Pace: 125 ms (+ 50 ms; – 0 ms)d Sense: 75 ms (+ 50 ms; – 0 ms)d
• Refractory: 250 ms ± 5%d
• Operating temperature: 10°C to 43°C (50°F to 110°F)e>
• Storage temperature: -40°C to 70°C (-40°F to 158°F) (without battery)
• Storage humidity: 90% maximum
• Battery type: Standard 9 V, Alkaline Type 6LR61 or Type 6F22E, NEDA 1604A (Eveready Energizer 522 or equivalent) or Lithium NEDA 1604LC (Ultralife U9VL or equivalent)

The Terumo Sarns System 1 is a Heart-Lung machine that delivers high-quality care for patients. The Terumo Sarns 1 is a flexible system that can be customized to fit the specific needs along with being reconfigured as those needs change. The System allows for a variety of devices can be connected to the Advanced Perfusion System1 system to control and monitor the patient during a cardiopulmonary procedure. Pumps can either be mounted side by side on the system base or they can be mounted along on a pole to reduce the size of the Term Sarns Unit.

 

The System comes with a touchscreen Central Control Monitor that allowed for up to 12 different Perfusion screens and different equipment or protocol setups.
The Touch screen also allows the user to control the pump speed, gas flow, and Fi02 (for electronic gas blenders).

• The System comes with a standard internal battery backup that has a minimum of 60 minutes
• Comes with a fat processing, high-resolution touch screen monitor
• Create up to 12 customizable perfusion screens
• Compact, space saving base with multiple options for attaching pumps
• The System allows the user to define the pump response along with safety
• Multiple cardiography delivery options

Designed to help clinicians achieve the best possible outcome Centrifugal and Roller Pumps

• System supports up to eight pumps, including two centrifugal pumps.
• Base- or pole-mounted roller pumps with rotating raceways help reduce circuit length and hemodilution.
• Clinicans may choose 6″ or 4″ roller pumps to adapt to different protocols.
• Centrifugal and roller pumps can be controlled from the speed control knob or the Central Control Monitor.
• Fast power-on of roller and centrifugal pumps allows users to quickly respond in emergent situations.
• The roller pump’s occlusion mechanism with audible feedback can be adjusted while the pump is running.
• The arterial pump displays alert and alarm messages that affect operation. Pump status and safety messages can be viewed on either the pumps’ local display or the Central Control Monitor.
• Self-adjusting tube clamp mechanism eliminates the need to change tube inserts.
• Remote-mounted centrifugal pump motor helps to reduce tubing lengths.
• Non-invasive flow sensor eliminates the need for a disposable flow probe.
• Uni-directional hand crank ensures correct blood flow direction.
• Updated roller pump software improves pumping performance.
• Newly designed roller pump lids improve accessibility to the pump raceway. The metal pump lid hinge is strong and durable.
• Colorful new roller pump caps include instructional graphic to make operation more intuitive and help guide users as they change occlusion levels. Integrated magnet secures colored cap to occlusion knob.

Flexible Design Evolves with user needs

The Terumo System 1 is configurable and adapts to evolving practices or individual clinician needs.

The basic system configuration is intuitive, with quality and technology features that address today’s perfusion practices. As perfusion techniques evolve, the system configures quickly and simply to adapt to new protocols and leading-edge practices.

Advanced functions can be performed

• Pulsatile flow operation on arterial pumps
• User-selectable Coast™ response on centrifugal pumps
• Pump flow setpoint and pressure setpoint (negative or positive) maintained by activating the Servo-Regulation feature
• Master/Follower pump operation in which any two roller pumps can be used to deliver multi-ratio cardioplegia to minimize hemodilution and optimize myocardial protection

Electronic Patient Gas System (EPGS)

• Unique technology allows the gas blender to be integrated into the base and controlled through the CCM or locally.
• An integrated oxygen analyzer measures oxygen content of the blended gas and displays it on the CCM.
• Settable low FiO2 alarm displays on the CCM screen in the case of an out-ofrange level.
• High and low gas source pressure alarms display on the CCM if the gas supply is outside the recommended pressures.
• A multi-colored LED on the base provides status indications.
• Software updates streamline and improve the EPGS calibration process.
• Increased messaging and changes to the CCM display better inform users of gas blender status.

Internal Battery Backup and Power

• System provides a minimum of 60 minutes of internal battery backup.
• New circuitry and software algorithms enhance battery performance. New battery charge level display increases accuracy.
• Enhanced battery reporting and new A/C visual indicators on CCM splash screen during power up improve battery status communication to users.
• System periodically reminds users to perform a battery health test.
• Sealed power switch adds durability, and new protective plate on switch prevents inadvertent power downs.

Refurbished Terumo Sarns System 1 Heart-Lung Machine

Soma Tech Intl offers Refurbished Terumo Sarns System 1 Heart-Lung Machine
up to 50% below OEM prices with the same service and warranty as new. The Term Sarns Heart-Lung Machine is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Heart-Lung Machine is carefully inspected and tested by our own in-house biomedical engineers that are highly skilled and certified to work on Heart-Lung Machines
. If necessary, parts are replaced to make sure that all aspects of the heart-lung machine is functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Terumo Sarns System 1 Heart-Lung Machine is working like new it undergoes a special cosmetic restoration process. The Term Sarns is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the Unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Terumo Sarns System 1 Heart-Lung Machine is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Terumo Sarns System 1
contact soma at Soma@SomaTechnology.com or call us at 1-800-GET-SOMA.

Soma Tech Intl is also actively looking to purchase a Terumo Sarns Heart-Lung Machine
If you or your facility is looking to sell your Terumo Sarns System 1, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Terumo Sarns System 1 Heart-Lung Machine to Soma Tech takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Tech is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain space for new equipment, or if you are looking to upgrade your current equipment, contact Soma Tech’s purchasing department at Buyer@SomaTechnology.com or send us a message on our </a href=”https://www.somatechnology.com/Sell-to-Soma/” target=”_blank”>Sell to Soma website.

 

 

he Medtronic Biomedicus Model 550 Bio-Console Pump speed controller offers control and monitoring for the
Bio-Pump Centrifugal Blood Pump. The Medtronic 550’s ergonomic design features an uncluttered control panel and highly visible graphics Compatible with most heart-lung consoles RPM control knob alerts the operator that a low-flow condition is approaching.

Are you looking for a full ECMO machine setup? Click here to see our different packages!

 

• Analog and Digital displays for flow and RPM
• Color LCD display for greater ease of use
• Now with TWO pressure measurement capabilities
• New distinctive user choices for alerts/alarms
• Updated flow control knob for enhanced ergonomics
• Remote capability for convenient LCD/flow controller placement
• The unique base unit display offers redundancy for peace of mind
• Updated battery charge status display
• Updated electronic architecture provides a bright future for new functional enhancements